Body, generic

B0111 Camera Washer Actuator H

Check engine lightUsually off
EmissionsNot relevant
Drive cycleNot required
Limp modeNo

B0111 is the J2012 code for camera washer actuator H, but the number has an older second life. Toyota's bulletin T-SB-0069-12 (revision 2, 2014) for the 2004–2009 Sienna lists B0111 together with B0116 as an open side-airbag squib circuit with the SRS lamp lit, repaired in the floor harness. On that van the code has nothing to do with washing, and a scan tool showing the generic title would mislead. In the generic sense, actuator H is one of the pumps or valves that suppliers such as Kautex offer for ADAS cleaning, next to heated nozzles, heated hoses, connectors and level sensors. No manufacturer publishes which camera H means or documents B0111 as a washer code.

Likely causes

Pump or valve H open, shorted or seized
Water ingress or corrosion in the plug of actuator H

Symptoms

  • Camera served by actuator H is not washed
  • No washer fluid leaves the nozzle served by actuator H when the wash is requested

Repair estimate

DifficultyMediumDIY possible
Parts and labour€30–400
Time0.3–2 h

Typical range across vehicles; the real cost depends on what the testing finds.

Parts involved

camera washer actuator hwasher pumpactuator wiring

Related codes

B0110B0112B0116

References: static.nhtsa.gov, kautex.com.