Body, generic

B0113 Camera Washer Actuator K

Check engine lightUsually off
EmissionsNot relevant
Drive cycleNot required
Limp modeNo

B0113 names actuator K. Even a working actuator is useless if the jet misses the lens. Stellantis TSB 23-049-22 Rev. A for 2022–2023 Jeep Grand Cherokee (WL) built between 13 April and 15 September 2022 found the liftgate nozzle of the digital rearview mirror camera pointing the wrong way; it is unclipped, turned 180 degrees and refitted, after which the mirror is reset by holding its plus and minus buttons for about 15 s. Bowles' application US20140060582A1 explains the geometry: a nozzle offset roughly 10 to 30 mm beside the lens, aimed within about 1 to 20 degrees of its surface and kept out of the field of view. A misaimed jet sets no code; B0113 concerns the actuator circuit, for a camera that is not published.

Likely causes

Open or short in the circuit of valve or pump K
Wire fatigue in the liftgate hinge area
Plug not reconnected after the camera or nozzle was removed

Symptoms

  • Camera wash does not run for the camera served by actuator K
  • Digital mirror or reversing picture stays dirty after the wash is requested

Repair estimate

DifficultyMediumDIY possible
Parts and labour€20–350
Time0.3–1.5 h

Typical range across vehicles; the real cost depends on what the testing finds.

Parts involved

camera washer actuator krear cameraactuator wiring

Related codes

B0112B0114B010B

References: static.nhtsa.gov, static.nhtsa.gov, patents.google.com.