Body, generic

B0325 Driver Seat Memory Set Switch

Check engine lightUsually off
EmissionsNot relevant
Drive cycleNot required
Limp modeNo

Searches turned up B0325 in no J2012 list and in no factory documentation. The title names the SET or M button used to store the current seat position under one of the memory buttons. Saab's 9-3 driver seat module knows it as the memorize button: B2765 01 when its line is shorted to battery voltage, B2765 61 when it is held or stuck for more than 60 s; the module then treats it as released until it is pressed afresh. US4682088A and US4463426A describe the classic sequence – press SET, then memory 1 or 2 within a short window – and US4264849A uses the same buttons both to recall and, with a store key, to save. A faulty set switch blocks saving but not manual adjustment.

Likely causes

Memory set button stuck in the door or seat panel
Switch contacts worn or contaminated
Button wire shorted to supply voltage or broken

Symptoms

  • New seat positions cannot be stored
  • Memory buttons recall old settings only

Repair estimate

DifficultyEasyDIY possible
Parts and labour€30–250
Time0.3–1.5 h

Typical range across vehicles; the real cost depends on what the testing finds.

Parts involved

memory switchseat module

Related codes

B0580B0310B0327

References: saabwisonline.com, saabwisonline.com, patents.google.com, patents.google.com.