Powertrain, generic · Fuel and air metering (injector circuit)

P02F2 Cylinder 5 Injector Circuit Range/Performance

Check engine lightOn
EmissionsRelevant
Drive cycleRequired
Limp modePossible

P02F2 reports an electrically implausible response of the cylinder 5 injector – not an open or short circuit (those are P0205, P0273 and P0274), but a current or voltage pattern outside the expected range. GM's 8-cylinder diesel checks the time the current takes to fall from hold to zero (outside 20–50 µs in 10 of 20 samples, two trips); GM's petrol direct injection evaluates the voltage feedback of opening and closing; Ford's diesels flag the injector's voltage or charge regulator at its limit (90 s), Ford's petrol direct injection its controlled-valve-operation adaptation at its limit. The injector may be shut off, causing misfire.

Likely causes

Injector electrically aged (piezo capacitance, coil resistance)
Contact resistance in the injector 5 connector or wiring
Injector mechanically sticking (valve lift)
Injector driver stage in the engine module

Symptoms

  • Check engine light on
  • Rough running, misfire on cylinder 5
  • Loss of power, smoke (diesel)

Repair estimate

DifficultyHardWorkshop job
Parts and labour€100–900
Time1–4 h

Typical range across vehicles; the real cost depends on what the testing finds.

Parts involved

fuel injector cylinder 5injector wiringengine control module

Related codes

P0205P0273P0274P0275P02F3P0305

References: fordservicecontent.com, gsi.ext.gm.com, gsi.ext.gm.com, fordservicecontent.com.