Powertrain, generic · Vehicle speed, idle control and auxiliary inputs

P0584 Cruise Control Vacuum Control Circuit High

Check engine lightUsually off
EmissionsNot relevant
Drive cycleNot required
Limp modeNo

Older engines without electronic throttle use a vacuum cruise servo on the throttle cable: a vacuum valve (closed when unpowered) opens the throttle with intake vacuum, a vent valve (open when unpowered) holds or releases it, and a dump valve fed through the brake switch vents it when braking. Where the engine module drives these valves, it checks each circuit and switches cruise off; CARB treats this as emission-neutral, usually without warning lamp. P0584 means the voltage at the vacuum valve driver is too high – a control line shorted to positive or a valve drawing no current when commanded. No manufacturer document available to us uses this code.

Likely causes

Vacuum control line shorted to positive
Servo or vacuum valve faulty internally
Damp or corroded connector
Engine module

Symptoms

  • Cruise control cannot be engaged or switches off
  • Cruise indicator goes out or flashes (depending on vehicle)
  • Usually no check engine light, code stored only

Repair estimate

DifficultyMediumDIY possible
Parts and labour€30–300
Time0.5–2 h

Typical range across vehicles; the real cost depends on what the testing finds.

Parts involved

cruise control servoservo solenoid valvesservo wiringengine control module

Related codes

P0582P0583P0588P0596

References: patents.google.com, patents.google.com, law.cornell.edu.