Powertrain, generic · Computer and auxiliary outputs

P0610 Control Module Vehicle Options Error

Check engine lightOn
EmissionsRelevant
Drive cycleNot required
Limp modeNo

The module checks its vehicle-specific configuration for completeness and validity: at Ford the vehicle identification block or as-built data with tyre circumference, axle ratio, transmission and options; at GM the programmed vehicle options. Ford 2012 sets P0610 when one or more fields of that block are configured wrongly, the Ford diesel checks continuously within 0.5 s; GM and Saab V6 engines set it in the first trip, also for incomplete programming. Typical triggers are a new or used module without correct configuration, an interrupted reprogramming, or changed tyres or axle without updating the data. Symptoms include wrong speedometer readings or shift points and missing functions such as cruise control. The fix is rewriting the configuration or VIN-specific programming with the manufacturer's tool; replace the module only if the code returns.

Likely causes

Module not or wrongly configured after replacement (used part, missing as-built data)
Interrupted or faulty reprogramming
Changed tyre size or axle ratio without updating the data
Internal memory fault of the module

Symptoms

  • Check engine light (depending on maker and variant)
  • Wrong speedometer reading or shift points
  • Optional functions such as cruise control missing

Repair estimate

DifficultyMediumWorkshop job
Parts and labour€80–400
Time0.5–1.5 h

Typical range across vehicles; the real cost depends on what the testing finds.

Parts involved

engine control modulevehicle configuration data

Related codes

P0630P0602P0603P062FP0606

References: law.cornell.edu, fordservicecontent.com, newtonnet.co.uk, saabwisonline.com.