Powertrain, generic · Transmission

P0895 Shift Time Too Short

Check engine lightOn
EmissionsNot relevant
Drive cycleRequired
Limp modePossible

Shift time is the duration of the speed transition from the old to the new ratio, measured from input and output speed. Gearbox modules adapt fill time and pressure to keep it in a calibrated window; the code sets when adaptation is at its limit and the time is still outside. No maker could be found using these generic codes; Saab's 1994 900 automatic monitored the same with its own code P1832, a window of 0.3 to 1.3 s and a limp program. P0895 means the shift completes faster than the window: clutch pressure too high or applied too early, giving a harsh shift.

Likely causes

Pressure control valve stuck towards high pressure or line pressure too high
Shift adaptation faulty or reset, wrong software
Valve body: sticking spool, faulty damper or accumulator
Wrong fluid or level

Symptoms

  • Harsh, jerky shifts
  • Transmission warning lamp
  • Limp mode possible

Repair estimate

DifficultyHardWorkshop job
Parts and labour€100–2,500
Time0.5–8 h

Typical range across vehicles; the real cost depends on what the testing finds.

Parts involved

transmission valve bodypressure control solenoidtransmission clutchestransmission control module

Related codes

References: law.cornell.edu, saabwisonline.com, static.nhtsa.gov.