Powertrain, generic (extended)

P21A3 Cylinder 8 Air-Fuel Ratio Imbalance

Check engine lightOn
EmissionsRelevant
Drive cycleRequired
Limp modeNo

P21A3 blames cylinder 8, on a V8 the last cylinder in the numbering. No manufacturer documentation of this code is publicly available, and no bulletin in the NHTSA index refers to it; the basis is the general CARB requirement for detecting cylinder imbalance, phased in for 2011 to 2014 model years with an emission threshold of 3.0 times the FTP standard (4.0 for SULEV II) until 2014 and 1.5 times from 2015. Whether cylinder 8 lies on bank 1 or bank 2 depends on the maker's numbering, which tells you whether P219A or P219B should accompany it. As Toyota and Lexus bulletins on cylinder codes show, leaking or restricted injectors, an intake leak at one runner and leaking valves are the usual causes. An injector balance test and a leak-down test on cylinder 8 come before any sensor work.

Likely causes

Cylinder 8 injector out of tolerance
Valve leakage at cylinder 8
Intake leak at the cylinder 8 runner

Symptoms

  • Check engine light on
  • Usually no driveability change
  • Possible P0308 with a strong deviation

Repair estimate

DifficultyMediumWorkshop job
Parts and labour€0–1,800
Time0.5–8 h

Typical range across vehicles; the real cost depends on what the testing finds.

Parts involved

fuel injector

Related codes

References: law.cornell.edu, static.nhtsa.gov, static.nhtsa.gov.