Network, generic

U0430 Invalid Data Received From Tire Pressure Monitor Module

Check engine lightUsually off
EmissionsNot relevant
Drive cycleNot required
Limp modeNo

U0430 means that a receiver gets frames from the tire pressure monitor module but rejects what they contain, such as wheel pressures, sensor identifiers or a system status outside the permitted range, or a broken message counter. A stand-alone evaluation unit exists for example in the 2020 Jeep Gladiator Rubicon, whose TPM module FCA reflashed to add the selectable tire fill alert (bulletin 08-023-20). No manufacturer documents U0430 publicly with thresholds or a named receiver. FMVSS 138 obliges the TPMS malfunction telltale to light within 20 minutes of a fault that disturbs how the system creates or transmits its signals, so a lit warning lamp and missing pressure readings are the usual result. U0127 is lost contact, U0330 a software mismatch.

Likely causes

Outdated or unsuitable software in the tire pressure module
Wheel sensors not learned after tire or wheel change, module sends default values
Poor supply, ground or connector at the tire pressure module

Symptoms

  • TPMS malfunction lamp on or flashing
  • Tire pressures missing or shown as dashes in the cluster

Repair estimate

DifficultyMediumWorkshop job
Parts and labour€40–450
Time0.3–1.5 h

Typical range across vehicles; the real cost depends on what the testing finds.

Parts involved

tpms module

Related codes

References: static.nhtsa.gov, law.cornell.edu, en.wikipedia.org.