Network, generic

U0522 Invalid Data Received From Door Switch G

Check engine lightUsually off
EmissionsNot relevant
Drive cycleNot required
Limp modeNo

J2012 provides seven door switch units, and G is the last of them. Few vehicles need that many networked switch packs, and no manufacturer publishes what G stands for or documents U0522. Where such a unit exists it works like its siblings: it supplies its button states when asked, and the receiver ignores them once a frame is malformed, out of range or carries an invalid counter. After a switch pack has been replaced or the body controller reconfigured, a variant or software level that does not suit the vehicle can produce exactly this pattern; FCA's Cherokee bulletin 08-013-15 shows door-switch codes being cleared by BCM software and a restored configuration. All other doors and switches carry on working. U0221 is the partner for complete silence.

Likely causes

Switch variant or body controller configuration not matching
Switch unit G internally faulty
Data or supply wire to switch unit G damaged

Symptoms

  • One additional switch panel ignored by the vehicle
  • Code appears after a switch or module replacement

Repair estimate

DifficultyMediumWorkshop job
Parts and labour€0–350
Time0.3–1.5 h

Typical range across vehicles; the real cost depends on what the testing finds.

Parts involved

door switch g

Related codes

U0221U0521U0516

References: static.nhtsa.gov, nxp.com.