Body, generic

B010D Camera Washer Actuator D

Check engine lightUsually off
EmissionsNot relevant
Drive cycleNot required
Limp modeNo

B010D covers actuator D. Audi's TSB 2059228/2 (2022) for the 2019–2022 e-tron and 2020–2022 e-tron Sportback shows what a missing check valve does to a rear camera wash: the line empties while driving or when the tailgate opens, the system stops after four activations to save fluid, and four tries are not enough to refill and pressurise it, so the lens stays dirty until the ignition (terminal 15) is switched off and on. The fix adds an inline valve, part 4N0 955 481 A. ARaymond fits such a non-return valve directly into a slim rear camera nozzle in a tailgate handle. Here the driver sees no spray but no fault code; B010D itself points to an electrical fault at actuator D, whose camera assignment is not published by any maker.

Likely causes

Pump or valve D open, shorted or drawing abnormal current
Wire break where the harness flexes into the tailgate
Pump damaged by repeatedly running dry on an empty line

Symptoms

  • Camera wash request must be repeated several times before fluid arrives, or nothing arrives
  • Reversing camera stays smeared after the wash function has been used

Repair estimate

DifficultyMediumDIY possible
Parts and labour€20–300
Time0.3–1.5 h

Typical range across vehicles; the real cost depends on what the testing finds.

Parts involved

camera washer actuator dwasher pumpactuator wiring

Related codes

B010CB010EB0119

References: static.nhtsa.gov, media.araymond.com.