Powertrain, generic · Transmission

P07F0 Transmission Range Multi-Function Select Circuit High

Check engine lightOn
EmissionsNot relevant
Drive cycleNot required
Limp modePossible

'Transmission Range Multi-Function Select' is the multi-bit code of the shift-by-wire selector position: each position produces a fixed pattern of sensor states, and the module checks the pattern for logic errors. Mitsubishi's 2022 CVT with electric shift uses eight sensors (R: 1–2 on, N toward R: 1–5, home: all, N toward D: 4–8, D/M: 7–8). P07F0 would be the high counterpart of P07EF: the position code reports a high state that matches no valid position, for example signal levels pulled up by a short to the supply. No manufacturer document available to us uses it – on Mitsubishi's selector 'all on' is the valid home position, so a high state cannot be told apart there. By analogy to P07EF a module would block range changes or select neutral.

Likely causes

Selector signal wires shorted to the supply
Selector faulty
Shift module

Symptoms

  • Shift warning or MIL (depends on manufacturer)
  • Range selection blocked or neutral

Repair estimate

DifficultyMediumWorkshop job
Parts and labour€150–1,000
Time0.5–2.5 h

Typical range across vehicles; the real cost depends on what the testing finds.

Parts involved

electronic range selectorselector position sensorsswitch wiringshift by wire module

Related codes

P07EFP07EEP07EDP07EBP0917

References: law.cornell.edu, mitsubishitechinfo.com, mitsubishitechinfo.com.